-
Long Reach Boom &Arm and Hydraulic Cylinder and Excavator Bucket Regular maintenance 1. Check excavator boom and arm pin bolts to avoid loosening, falling off and missing every day, and tighten them in time. 2. Check the excavator boom and arm structure for cracks and deformations every day. Pay attention to the surrounding environment when parking excavators, and park on solid, sm...
view more
-
Rules for Bulldozer and Grader Blades, Cutting Edge and End Bits replacement Article 1 Bulldozer should park on a flat and hard safety ground. Article 2 Lifts the shovel knife to the highest point, supports the pusher arms firmly with sleepers, extinguishes the bulldozer, prevents the shovel knife from falling and causes casualties. Article 3 Clean the soil and cover on the fixing bolt...
view more
-
Operating Regulations and Notices for Excavator Extended Long Reach Boom and Arm Excavators are very important for engineering construction, you all know very well, it belongs to heavy machinery and equipment, and now it is more common to use excavator elongated long boom and stick to carry out construction, because it has some high operational performance, but in the process of use, we must pay m...
view more
-
Correct maintenance of excavator bucket teeth Excavator bucket teeth and adaptor also has different names excavator bucket tip,rock bucket teeth,bucket point We know that the working device of excavator is mainly composed of bucket and boom, and excavator bucket is as important to excavator as hand is to human. So how to properly maintain our excavator's "big hand" to create more value for us? The...
view more
-
Share the correct installation process of excavator's extension boom and arm The installation of the long reach boom and arm of excavator is a professional technical work, which is related to the safety of use. In this article, Fortune Industrial shares and summarizes the process of the correct installation of the long reach boom and arm for you. (1) Retract the boom and arm to remove the bucket, ...
view more
-
How to choose the type of excavator bucket teeth? How to replace the dipper teeth correctly? The bucket tooth is the terminal of the working device of the excavator. In the process of excavation, the bucket tip is the working part with the largest load and belongs to the consumable part. Especially in the stonework construction environment, the bucket point wear is very fast. The use of bucket tee...
view more
-
Structure type and routine maintenance of loader bucket cutting edge and blades The cutter plate on the bucket is the main cutting edge when the loader bucket is digging materials. Under different working conditions of the loader, different types of cutter head will be selected for the bucket to ensure the working efficiency. At the same time, as an important part of the loader bucket, proper main...
view more
-
Use and maintenance of long reach boom and arm excavator The long-term operation of the long reach boom and arm in the harsh environment, maintenance of the extension arm can reduce the failure of the boom and arm, extend the service life of the extension arm, better improve the working efficiency, and make the extension boom and arm reach the best state. 1. Add butter at least twice a day for the...
view more
-
How to change teeth on excavator bucket Excavator bucket teeth has different names bucket tip and bucket point 1. The bucket teeth shall be kept sharp. 2. The teeth on both sides of the bucket are generally worn faster than those in the middle of the bucket. When the teeth on both sides are worn much shorter than those in the middle, the positions of the teeth on both sides and the middle can be i...
view more