Product Description
A two-section long reach boom is a matched boom-and-arm set, not a longer stick bolted onto the original machine. The boom, the arm, the bucket cylinder and the linkage are designed together, so the reach comes from the geometry of the set rather than from stretching a standard arm beyond what its section can carry.These sets are bought for work where the carrier cannot get close enough: river and canal dredging, sand and gravel transfer over a quay edge, expressway slope repair, deep foundation and cofferdam excavation, high-bench rock loading, and armour stone on a revetment. The photographs below are the configurations we build most — 22, 24 and 26 m on 35 to 80 t carriers — and every set is built to the machine it is going on, not to a catalogue size.
Boom and arm are Q355B plate from a first-class steel plant, cut, welded in a fixture and machined after welding so the pin bores stay true; pin and bore surfaces are hardened to HRC52–58 at 8–12 mm depth. One set ships complete: boom, arm (stick), bucket cylinder, bucket or grab, H and I linkages, four hoses and six pins. Painted black or yellow or your colour, OEM to your drawing or sample, 15–25 days after the contract.
Model DH500 · 26 m — a 26 m two-section set on a 50 t class carrier, loading out a rock face.
|
Model DH500 · 26 m — 26 m set on a 50 t carrier, working a blasted rock stockpile. |
Model EX800 · 22 m — 22 m set on an 80 t carrier at a demolition and rubble site. |
|
Model EX800 · 24 m — the same 80 t carrier with the longer 24 m set. |
Model ZX800 · 24 m — 24 m set placing armour stone along a coastal revetment. |
|
Model SK350 · 26 m — 26 m set on a 35 t carrier, foundation work between city buildings. |
Model HD2045 · 24 m — 24 m set working over a sheet-pile cofferdam, machine kept on the bench. |
|
Model HD2045 · 24 m — a second unit on a deep basement job, digging behind the sheet piles. |
Boom sections in fabrication — box-section plates and ribs welded in a fixture, pin bosses fitted before boring. |
|
Arm and bucket, assembled — the set matched on the shop floor before painting and dispatch. |
Box section detail — internal ribs, weld runs and the bored pin boss that carries the arm. |
Application
- River, canal and reservoir dredging — reach the middle of the channel from the bank, cut and re-profile silt without putting the carrier in the water or on soft ground.
- Sand, gravel and concrete transfer — load barges and hoppers over a quay edge or a stockpile wall where a standard boom runs out of reach before the bucket arrives.
- Deep foundation and cofferdam work — dig behind sheet piles and inside basement or metro pits while the machine stays on the bench above the excavation.
- Expressway slope repair — dress failed batters, cut benches and clear the toe of a slide from the shoulder, without building a temporary ramp for the excavator.
- High-bench rock and overburden loading — stand on the top bench and load trucks parked below, keeping the face between the operator and the drop.
-
Riverbank and coastal protection — place armour stone and riprap on revetments and embankment toes from stable ground, one stone at a time, to line and level.
Features
-
Matched two-section geometry — boom, arm and cylinder designed as one set, so the extra reach comes from proportioned sections instead of an over-long stick on the original machine.
-
Q355B box sections — plate from a first-class steel plant, cut, welded in a fixture and machined after welding, with internal ribs at the load points.
-
Hardened pin and bore surfaces — HRC52–58 at 8–12 mm depth at the joints that carry the whole set, which is where a long boom normally starts to knock.
-
Complete set in one order — boom, arm (stick), bucket cylinder, bucket or grab, H and I linkages, four hoses, six pins. Nothing left for the customer to source locally.
-
Bucket, grab or custom head — the set is finished with the attachment the job needs, sized for the longer reach rather than for the original stick.
-
22, 24 and 26 m as standard — other lengths to drawing; built to the carrier model, pin diameters and centre-to-centre, so it pins on without adapters.
-
Painted and marked to your fleet — black, yellow or matched to your colour, with your branding and part numbers on the sections.
-
Quality control at each stage — hardness testing, welding quality inspection, dimension inspection and visual inspection before anything is packed.
-
Fast production and delivery — 15–25 days after the sales contract, in fumigated seaworthy packing to export standard.
Product Parameters
| Product Name | Two-section long reach boom and arm (stick) for crawler excavators |
| Production Standard | OEM / built to customer drawing or sample |
| Material | Q355B purchased from first class steel plant |
| Finish | Smooth |
| Painting Color | Black or Yellow,etc(painting as customers' request) |
| Process | Cutting,Welding and Machining; pins and bushings forged or cast |
| Surface Hardness | HRC52-58, Depth:8mm-12mm |
| Quality Guarantee | 6 months--one year |
| Certification | ISO9001-9002 |
| Delivery Time | Within 15--25 days after sales contract establishment |
| Package | Fumigate seaworthy packing and Export Standard Package |
| Payment Term | TT, L/C, Paypal, Western union,D/P |
| Application | Crawler Excavator & Wheel Loader & Backhoe & Digger |
Why Choose us?
| Caterpillar | Excavator | E320,E320D,E320E, E323, E330,E330D, E336,E345DL, E349DL, E374, E395, E305.5, E308, E312, E315 |
| Caterpillar | Bulldozer | D3, D5H,D5M,D5N, D6,D6H,D6R,D6T,D6M,D6N, D7, D7G,D7H,D7R,D8,D8N,D8R,D8T, D9, D9R,D9N,D9T,D10N,D10T, D11N,D11T |
| Caterpillar | Motor Grader | 120, 140, 160, 18, 24 |
| Komatsu | Excavator | PC55, PC70, PC130, PC200, PC220, PC240, PC300, PC350, PC400, PC450, PC650, PC800, PC1250 |
| Komatsu | Bulldozer | D20,D31, D37, D51, D61, D65EX-12,D65PX-15, D85EX-15EO, D85ESS-2A,D155AX-6, D275, D375, D475, D575 |
| Komatsu | Wheel Loader | WA100, WA150, WA200, WA250, WA320, WA380, WA430, WA470, WA500, WA600, WA800, WA900 |
| Komatsu | Motor Grader | GD405, GD555, GD655, GD675, GD755, GD825 |
| Hitachi | Excavator | ZX55, ZX70, ZX120, ZX130, ZX200, ZX210, ZX240, ZX250, ZX330, ZX350, ZX470, ZX670, ZX870, ZX1200, EX200,EX300,EX400 |
| JCB | Backhoe Loader | 1CX, 2CX, 3CX, 4CX, 5CX |
| JCB | Excavator | JS130, JS145, JS160, JS200, JS220, JS235, JS300, JS330, JS370, JS460 |
| Kobelco | Excavator | SK55, SK75, SK130, SK140, SK170, SK200, SK210, SK210LC-8,SK220, SK250, SK260, SK300, SK330, SK350, SK480, SK500, SK850 |
| Hyundai | Excavator | R55, R80, R110, R140, R160, R180, R210, R220, R250, R290, R300, R330, R360, R380, R430, R480, R520, R800 |
| Shantui | Bulldozer | SD08, SD13, SD16, SD22, SD23, SD32, SD42, SD52, SD90 |
| Shantui | Excavator | SE60, SE75, SE135, SE150, SE210, SE215, SE220, SE240, SE260, SE335, SE370, SE470, SE500 |
| Doosan | Excavator | DX55, DX60, DX80, DX140, DX150, DX170, DX200, DX225, DX235, DX255, DX300, DX340, DX350, DX380, DX420, DX480, DX520, DX530, DX700, DX800 |
| New Holland | Excavator | E18, E26, E33, E37, E55, E60, E75, E135, E145, E175, E215, E230, E260, E305, E335, E385, E485 |
| Daewoo | Excavator | DH55, DH60, DH80, DH130, DH150, DH170, DH200, DH220, DH225, DH258, DH280, DH300, DH320, DH360, DH370, DH420, DH500 |
FAQ
Q1: Which machines do these long reach booms fit, and what do you need to quote one?
A:
The sets photographed here run on 35, 50 and 80 t class crawler excavators, and a three-section version is available where more reach is needed. To quote, send the machine brand and model, pin diameters, boom foot width and centre-to-centre distance, and the reach you need. We confirm the geometry and the counterweight requirement before quoting, so the set is built to that carrier rather than to a general size.
Q2: What is included in one set?
A:
1 boom, 1 arm (stick), 1 bucket cylinder, 1 bucket, grab or customised attachment, 1 set of bucket linkages (H link and I link), 4 hoses and steel tubes, and 6 pins. The set arrives as a matched package, so the installer is not chasing a cylinder, a linkage pin or a hose that no one quoted.
Q3: How does a 26 m boom ship, and how long does it take?
A:
It ships dismantled into boom, arm and linkage sections, in fumigated seaworthy packing to export standard, blocked inside the container. Loading photographs are sent before the container is sealed. Standard production is 15–25 days after the sales contract, and longer sets are scheduled at the same time as the carrier's delivery.
Q4: Can you build a different length, or fit a grab instead of a bucket?
A:
Yes. 22, 24 and 26 m are the lengths we build most, and other lengths are produced to drawing. The head end can be a bucket, a grab or a customised attachment, sized for the longer reach. Painting is black, yellow or matched to your colour, and production is against your sample, drawing or OEM part number.
Q5: What is the warranty, the quality control and the payment terms?
A:
Quality guarantee is 6 months to one year, with ISO9001-9002 certification. Every set goes through hardness testing, welding quality inspection, dimension inspection and visual inspection before packing. Payment by T/T, L/C, PayPal, Western Union or D/P, packed in fumigated seaworthy crates to export standard.















