Two Section Long Reach Excavator Boom And Arm Assembly

Product Description
The long reach boom and arm (stick) is an extended front attachment for crawler excavators. Xiamen Fortune Industrial Co., Limited supplies it to OEM requirements for customers who need a longer working range than a standard boom and arm. Two-section and three-section configurations are available; the suitable type depends on the base machine and job requirements.

The two-section type is used for sand and concrete handling, expressway slope repair, river dredging, and excavation of building foundations and deep ditches. Confirm the required working radius and digging depth against the excavator model before ordering.

The three-section type adds another boom section for applications that require an extended horizontal reach or greater digging depth. It may be considered for wide river channels, long or high slopes, and deep foundation or ditch work. Final length, pin dimensions and linkage must be confirmed from the machine details and customer drawings.

The supplied attachment set can include 1 boom, 1 arm/stick, 1 bucket cylinder, 1 bucket, grab or other customized attachment, 1 set of bucket linkages (H link and I link), 4 hoses or steel tubes, and 6 pins. The final configuration should be confirmed with the order. 

Application

A two-section long reach excavator boom and arm assembly extends the machine's working range, making it easier to handle excavation and material movement in areas beyond the reach of a standard excavator. It is a practical solution for projects involving deep digging, waterway maintenance and work along extended slopes.

Typical Applications:

• Waterway and riverbed maintenance. Excavating accumulated sand, silt and sediment from rivers, canals and reservoirs
• Roadside and embankment maintenance. Shaping, trimming and repairing highway slopes and railway embankments from a suitable working position.
  
• Foundation and basement projects. Reaching deep foundation areas and basement excavation zones without moving the excavator too close to the edge
• Drainage and trench construction. Excavating deep drainage ditches, long trenches and underground utility channels.
  
• Sand and concrete transfer. Reaching across obstacles or working areas to move and place sand, concrete and other construction materials.

What's Included in the Set?

Each set of our three-section long reach boom and arm ships complete with all connecting parts, so the machine can start working right after installation:

• 1 x Boom (Section 1)
• 1 pcs x Arm/stick
• 1pcs x Bucket cylinder
• 1pcs x  Bucket, Grab or customized attachment
• 1set x Bucket Linkages ( H Link, I Link)
• 4pcs x Hoses, steel tubes etc.
• 6pcs x Pins

Product Parameters

FAQ

Q1:  What types of long reach boom and arm are available?
A:Two configurations are listed: two-section and three-section. The choice depends on the required reach, digging depth and base machine.

Q2: What is the two-section type mainly used for?
A: Typical applications include sand and concrete handling, expressway slope repair, river dredging, and excavation of foundations and deep ditches.

Q3: When should a three-section type be selected?
A: Consider the three-section type when the job requires a longer horizontal reach or greater digging depth. Confirm the required dimensions against the machine and site conditions.

Q4: Which machines can use this boom and arm?
A: The supplied model list covers multiple brands and machine types, including excavators, bulldozers, motor graders, wheel loaders and backhoe loaders. Actual compatibility must be checked for the exact machine model, pin size and working range.

Q5: Can the boom and arm be customized?

A: Yes. The supplied product information states that production can follow customer samples, designs and drawings. Confirm the required length, pin dimensions and linkage before placing the order